로봇시험인증센터

* DC 파워분석
- DC Power Analyzer Main Frame max 4ch, 600 W : 1 Set
- DC Power Module 150V, 2A, 300W : 1 ch
- DC Power Module 150V, 2A, 300W : 2 ch
- DC Power Module 35V, 1.5A, 50W : 3ch
- Power Analyzer
a) Voltemeter / Ammeter
b) Oscilloscope
c) Data Logger
d) Arbitrary Waveform Generator
- DC Output Ratings
a) Port 1
Voltage : +20 V / 6V, Current : ± 1 A / ±3 A, Power : 20 W
b) Port 2
Voltage: 20 V / 15V / 10V / 6V, Current : ± 4 A / ±5 A / ±6.7A/ ±8 A Power : 80W
- Output Ripple and Noise (PARD): (from 20 Hz – 20 MHz)
a) 1 ch : CV peak-to-peak : 68 mV, CV rms : 27 mV
b) 2 ch : CV peak-to-peak : 68 mV, CV rms : 27 mV
c) 3 ch : CV peak-to-peak : 15 mV, CV rms : 5 mV
- Voltage measurement accuracy :
a) 1 ch : 0.1% + 150 mV
b) 2 ch : 0.1% + 150 mV
c) 3 ch : 0.1% + 35 mV
- Current measurement accuracy :
a) 1 ch : 0.15% + 6 mA
b) 2 ch : 0.15% + 6 mA
c) 3 ch : 0.15% + 4 mA


* 신호 및 파형 분석
- Operating system : Window10 OS
- 8 analog channels : 8채널
- vertical resolution : MAX 16 bits
- 대역폭 : 1GHz
- Max Sample rate(All Channels) : 16 GSa/s
- Memory depth : 200 Mpts/channel, all channels (표준)
- Real-time update rate : > 200,000 waveforms/sec
- Trigger type
- Edge, Pulse Width, Runt, Timeout, Window, Logic, Setup & Hold, Rise/Fall Time, Parallel Bus, Sequence, Visual Trigger, infiniiScan Zone
- Horizontal position range : 0 s to ± 200 s, Continuously adjustable
- Low Speed Seria (옵션)
- I2C, SPI, Quad SPI, eSPI, Quad eSPI, RS232, UART, JTAG, I2S, SVID, Manchester
- 15.4-inch 이상의 정전식 터치 스크린 지원
- 6x USB 3.0 host ports, USB 3.0 Device (1 port), LAN (10/100/1000 Base-T Ethernet; LXI Compliant), Auxiliary out, VGA, Trigger out

* 멀티미터
- 7½ digit
- DC voltage Range : 100 mV - 1000 V
- RMS AC voltage Range : 100 mV - 750 V
- DC current Range : 1 uA - 10 A
- AC current Range : 100 uA - 10 A
- Frequency: 3 Hz to 300 kHz
- Temperature: RTD/PT100, thermistor,thermocouples
- Capacitance Range : 1.0 nF to 100.0 μF
- Reading rate: 50,000 S/s


*함수발생
- Bandwidth / Channels : 80 MHz / 2 channel
- Waveforms Standard : Sine, Square, Ramp, Pulse, Triangle, Gaussian Noise, PRBS (Pseudorandom Binary Sequence), DC
- Built-in arbitrary : Cardiac, Exponential Fall, Exponential Rise, Gaussian Pulse, Haversine, Lorentz, D-Lorentz, Negative Ramp, Sinc
- User-defined arbitrary : Up to 4 MSa (64 MSa with Option MEM) with multi segment sequencing
- Operating modes : Continuous, Modulate, Frequency Sweep, Counted Burst, Gated Burst
- Modulation types : AM, FM, PM, FSK, BPSK, PWM, Sum (carrier + modulation)
- Frequency range
Sine : VOUT ≤ 8 Vpp: 1 µHz to 80 MHz, 1-µHz resolution
Square / Pulse : VOUT ≤ 10 Vpp 1 µHz to 50 MHz, 1-µHz resolution
Ramp / Triangle : 1 µHz to 800 kHz, 1-µHz resolution
Gaussian Noise : VOUT ≤ 8 Vpp 1 mHz to 80 MHz
Pseudorandom Binary Sequence (PRBS) : VOUT ≤ 10 Vpp 1 mbps to 100 Mbps, 1-mbps resolution
- Amplitude : 2 mVpp to 20 Vpp into open circuit, 4-digit resolution
- DC offset : ± (10 VDC - peak AC) into open circuit, 4-digit resolution
- Frequency accuracy :± (1 ppm of setting + 15 pHz), 1 year, 23 °C ± 5 °C
- Connectivity : USB, LAN、


* 스펙트럼분석
- Frequency range: 9kHz～6GHz or wider
- Frequency reference Aging rate : ± 1 x 10–7 / year, ± 1.5 x 10–7 / 2 years
- Frequency reference Temperature stability : 20 to 30 °C(± 1.5 x 10–8)
- Frequency reference Achievable initial calibration accuracy : ± 4 x 10–8
Frequency reference Residual FM : ≤ 0.25 Hz p-p in 20 ms nominal
- Frequency span Range : 0 Hz (zero span), 10 Hz to maximum frequency of instrument
- Frequency span Resolution : 2 Hz
- Frequency span Accuracy : ± (0.10 % x span + horizontal resolution)
- Analysis bandwidth: ≥10 MHz
- Resolution bandwidth(RBW) Range(–3.01 dB bandwidth): 1 Hz to 3 MHz (10 % steps), 4, 5, 6, 8 MHz
- Resolution bandwidth(RBW) accuracy (power): ± 0.07 dB nominal
- Video bandwidth (VBW) Range : 1 Hz to 3 MHz (10 % steps), 4, 5, 6, 8 MHz, and wide open (labeled 50 MHz)
- Amplitude range(Preamp on) : Displayed average noise level (DANL) to +15 dBm
- Input attenuator range : 0 to 50 dB in 10 dB steps
- Phase noise @1GHz:
≤-130 dBc/Hz (1 MHz offset)
≤-106 dBc/Hz (10 kHz offset)
- Displayed average noise level (Preamp on) : 1.5 to 2.2 GHz(–160 (–163)dBm)
6 to 7.5 GHz(–148 (–152) dBm)
- Preamplifier gain: ≥20 dB


* 전력분석

- Input Range
Voltage:1.5/3/6/10/15/30/60/100/150/300/600/1000[V]
Current (5A input element)
Direct input : 10m/20m/50m/100m/200m/500m/1/2/5 [A]
External input:50m/100m/250m/500m/1/2.5/5/10[V] (50A input element) 3EA
Direct input : 1/2/5/10/20/50 [A]
External input:50m/100m/250m/500m/1/2.5/5/10[V]
- Frequency power range : DC, and 50 Hz to 1 MHz
- Basic power accuracy : ±0.1%
- High-speed data update : 50 ms
- Data Storing as Fast as 50 ms (20 Times per Second)
Store numerical data in media.(Media: USB storage device, max. 1GB)
- Communication function GP-IB Interface, Ethernet interface, USB PC Interface
- 8.4-inch TFT color LCD (1024 X 768 dots)
Numerical values, waveforms, trends, bar graphs, vectors VGA output By connecting the VGA output signals to an external monitor, you can create large displays of numerical values and waveforms
- Harmonic components of up to the 500th order can be measured.
- D/A Output (Option)
16bit(D/A conversion resolution), ±5V FS(max. approximately ±7.5V)
20channels(Output parameter can be set for each channel)
Same as the data update rate.
- USB for peripheral Devices.
. 2 ports, HS(High Speed) mode(480Mbps), FS(Full speed) mode(12Mbps) LS(Low Speed) mod(1.5Mbps)