무선전력전송기술센터

1) ENA Series 회로망 분석기
2) 주파수 범위 : 30kHz ~ 4.5 GHz
3) Wireless power transfer 해석 옵션
4) 출력전력 : ~ +20 dBm 고출력
5) 다이내믹 영역 : 151 dB
6) 측정속도 : 23 ms @ full 2port cal
7) 2D/3D 부하 시뮬레이션 도식화 기능
8) WPT 파라미터 도출 및 해석기능 탑재
9) Sweep speed : 23ms @full 2-port cal, 401 points, 100kHz IFBW, and 200MHz span
10) Trace Noise : 0.004dBrms @ 70kHz IFBA
11) Load Match : 46 dB(10 MHz to 3 GHz)
12) Test Port Output Range : -85 dBm to 16 dBm (300 kHz to 3 GHz)
13) Power Sweep Range : 65dB, -49 dBm to 16dBm (300 kHz to 3 GHz)
14) Test Port Output Level Resolution : 0.05 dB
15) Display : 10.4” TFT color LCD with touch screen, XGA (1024*768)
16) Mixer and Amplifier measurement wizard : Yes
17) Interface : GPIB, USB, LAN, Video Output
18) IFBW : 10Hz ~ 500KHz
19) 내장 포트 수 : 2-port
20) 어플리케이션 : S-파라미트, 이득 포화, 반사 손실, 삽입 손실/이득
21) Built-In Programming for test automation
22) 160 measurement channels and 16measurement traces
23) Intuitive user interface : hard keys, soft keys and pull-down menus
24) Context sensitive embedded help
25) Quick access for Ecal and other USB devices
26) Configurable test set available
27) AUX port for PAE measurements
28) 24-bit I/O
29) Flexible triggers(input/output) for measurement control
30) Bias Tee input(Damage level : ±35V, 1A DC)
31) Dimension : 222mm(H) x 426mm(W) x 446mm(D)
32) Weight : 20kg
33) Front-Panel Jemper
가) Measurement Receiver Input
(1) Noise Floor 30kHz to 10MHz : -128dBm/Hz
(2) Noise Floor 10MHz to 8.5GHz : -145Bm/Hz
(3) Maximum input Level 30 to 300kHz : -15dBm
(4) Maximum input Level 300kHz to 8.5GHz : -10dBm
나) Coupler arm output
(1) Damage Level : +15dBm or 0VDC
다) Source output
(1) Maximum Leveled Power 300kHz to 1GHz : +20.5dBm
(2) Maximum Leveled Power 1 to 3GHz : +19dBm
(3) Maximum Input Level : +20 dBm
라) Reference output
(1) Damage Level : +15dBm or 0VDC
34) General Information
가) Measurement Receiver Input
(1) System band width Range : 10Hz to 500kHz
나) Front Panel
(1) Test Ports : Type-N, female, 50Ω
(2) Front Panel Jumpers : SMA, female, 50Ω
다) Rear Panel
(1) External reference signal input connector
(2) Internal reference signal output connector
(3) Bias tee input connector
(4) Video output
(5) GPIB : 24-pin D-Sub (Type D-24), female
(6) USB host port
(7) USB interface port
(8) LAN : 10/100BaseT Ethernet
(9) Line Power
(가) Frequency : 47 Hz to 63 Hz
(나) Voltage : 90-264 VAC
(다) Power consumption : 135 W
35) Electronic calibration module
가) Calibration kit : 3.5mm, 50Ω
나) Directivity
(1) 300kHz to 10MHz : 45dB
(2) 10MHz to 3GHz : 52dB
다) Source match
(1) 300kHz to 10MHz : 36dB
(2) 10MHz to 3GHz : 44dB
라) Load match
(1) 300kHz to 10MHz : 37dB
(2) 10MHz to 3GHz : 45dB
36) Uncorrected System Performance
가) Directivity
(1) 300kHz to 10MHz : 15dB
(2) 10MHz to 3GHz : 25dB
나) Source match
(1) 300kHz to 10MHz : 15dB
(2) 10MHz to 3GHz : 25dB
다) Load match
(1) 100MHz to 2GHz : 15dB
(2) 2GHz to 4.5GHz : 11dB
37) Test Port Output(Source)
가) Test port output frequency
(1) Resolution : 1Hz
(2) Source Stability : Standard ±7ppm(5 to 40℃)
(3) CW accuracy : Standard ±7ppm
나) Test port output power
(1) Nominal Power(Preset Power) : 0dBm
(2) Range 30 to 300kHz : -85 to 10dBm
(3) Range 300kHz to 3GHz : -85 to 16dBm
다) Max Leveled Power
(1) 30 to 300kHz : 16dBm
(2) 300kHz to 1GHz : 20dBm
(3) 1 to 3GHz : 18dBm
라) Resolution : 0.05dB
마) Level Accuracy At 50MHz, 0dBm, absolute ±0.65dB
바) Power Sweep Range : 65dB
38) Test port output signal purity
가) Harmonics(2nd or 3rd)
(1) 30kHz to 2GHz : < -25dBc
(2) 2 to 4.5GHz : < -20dBc