o Knife proof performance tester of Textile product SPEC
- Drop height : 2.5 ~ 5.5 m
- Sabor weight : 1900 +/- 20 g
- Impact damping : Damping pads fitted in sabot
- Sample Mount : Strong, adjustable angle support
- Velocity sensor : 25 mm just prior to impact position by light beam breaking sensor via fibre optic cables
- Velocity sensor output : Suits SABRE IRIS
- Height sensor : Sabot height measured and displayed to allow control of impact energy level
- Sabot lifter : Either manual or electric winch can be provided
- Operating temperature range : 0 to 40℃
- Mounting arrangement : Mounted against wall or stand
- Calibration of backing materials : uses SABRE Clat Calibration Rig

o High Speed Camera SPEC
- Fastcam Mini UX100 200K C-32GB(Color)
- Sensor : CMOS sensor with 12 bit
- Sensor basic resolution : 1,280(H) x 1,024(V) px
- Pixel size : 10 μm
- Internal memory : 32 GB
- FPS 4,000 at 1,280(H) x 1,024(V) px
- FPS 204,800 at 1,280(H) x 1,024(V) px
- Lens mount : F & C mount
- Sensitivity (ISO 12232 Ssat) : 5,000(Color)
- Lens : MILVUS 2.0/100M ZF.2

o 3D Scanner SPEC
- Accuracy : 0.035 mm
- Volumetric accuracy : 0.020 mm
- Measurement resolution : 0.025 mm
- Mesh resolution : 0.1 mm
- Measurement rate : 800,000 Measurements/s
- Light source : 14 blue laser
- Scanning area : 310 mm x 350 mm

o Impact Load Measurement System SPEC
- Loadcell type : IEPE
- Loadcell capacity : 450 kg & 2,250 kg
- Linearity : less than 1 %
- Resonance frequency : 75 kHz
- Loadcell amplifier
· Frequency response ±3 db, 0.16 ~ 200 kHz
· Full scale output voltage : ±5 VDC
- Data Acquisition System
· Max sampling rate : 1 MHz
· No. of channel : 8 ch. with differential
· Analog input resolution : 16 bit