A. Analyzer
1. Automatically tunes the X‐ray tube source to provide optimal sensitivity to the widest range of elements.
2. Data Transfer: USB, Bluetooth
3. Patent Pending automatic air pressure correction for altitude changes critical for light element measurements
4. Weight: 3.25 lbs with Battery(<1.5kg)
5. Dimensions: 260 x 240 x 90 mm
6. Analytical Range
- Alloy and Mining: Mg and higher
- Soil: K and higher
7. Software
- 2 Beam Mining Mode
● Use 2 different X-ray beam
● High Energy X-ray beam
Analysis V, Cr, Fe, Co, Ni, Cu, Zn, W, As, Pb, Bi, Zr, Mo, LE, Ag, Cd, Sn, Sb, Ti, Mn
● Low Energy X-ray beam
Analysis: Mg, Al, Si, P, S, Cl, K, Ca, Ti, Mn
8. Data storage
- 2GB MicroSD
- 32 NAND Flash
- 128 MB SDRAM
- Memory Capacity: 150,000 readings
9. Power
- (2) Rechargeable Li‐ion battery packs
- Hot Swap: replace rechargeable battery without turning unit off
B. Excitation Source
1. X‐Ray tube
2. Rh anode
3. 10‐40kV, 10‐200uA
4. <20kV, up to 200uA
5. Power: 4W
6. User selectable and user settable X‐ray tube voltage & current
7. User controllable 8 position filter‐wheel
C. Detector
1. Large Size Silicon Drift Detector (SDD, 25mm2)
2. Electric Cooling
3. <165eV FWHM at 5.95keV Mn K‐alpha line
D. Display
1. 32bit Color QVGA resolution touch screen
2. 2.25 x 2.9 in (57 x 73 mm)
3. Variable brightness provides easy viewing in all ambient lighting conditions.
4. Immediate test results easily viewed on an additional rear display
5. Data Display: Concentrations in %. Spectral display with peak zoom and identification
6. Motion responsive accelerometer – readjusts screen for viewer
E. Docking Station
1. Recharges battery in unit and spare battery in station
2. Connect to a PC for Data Download and Analyzer
3. Automatically runs calibration check on instrument