1. 사양 ◇ WHEEL DRIVING AND TRUEING BY SERVOMOTOR WITH PC BASED CONTROL SYSTEM. ◇ USE SENSORS TO FIND THE SPOKES FOR TRUEING, WHICH CAN PREVENT THE DEFECT OF SPOKES'S SURFACE WITH SCAR ◇ AUTOMATIC ADJUSTMENT FOR DIFFERENT SIZE, WHICH IS COUPLED DRIVING TYPE TO MOVE UP AND DOWN DEVICES AT ONCE. ◇ AVAILABLE TO MAKE FOR 36 SPOKES TENSION KEEPING WITH ACCURACY ±15. ◇ AVAILABLE TO SET FOR REQUIRED TRUEING MODE ACCORDING TO WHEELS' QUALITY ◇ TRUEING BY SINGLE HAND AVAILABLE WHEN SPACE BETWEEN SPOKES IS SMALLER, SUCH AS SMALLER SIZE OR MORE SPOKES OF A WHEEL. ◇ WITH TOUCH SCREEN INTERFACE FOR EASY SETUP. ◇ WITH SCREENS TO DISPLAY REASONS FOR NUMBER OF REJECTED WHEELS, AVERAGE TRUEING TIME, INDICATION FOR SENSOR WITH PROBLEM, AND ETC. ◇ THE TRUEING REQUIREMENT CAN BE STORED IN THE MEMORY, AND THE OPERATOR CAN EASY CHOOSE A KNOWN WHEEL TYPE FROM THE DATABASE. ◇ WITH TWO OUT-GOING TRACKS : ONE FOR GOOD WHEELS AND THE OTHER FOR REJECTED ONES. ◇ UP TO 0.15M/M TRUEING ACCURACY ◇ APPLY TO 16"~28" WHEELS, INCLUDED DEEP-V TYPE. ◇ SIZE OF NIPPLE : #12, #13, #14, #15 ◇ SUITABLE SPECIFICATION ① HUB AXLE : ￠8~￠14.5mm ② MAX. HUB LENGTH : 220mm ③ MIN. HUB INNER WIDTH : 65mm ④ WHEEL WIDTH : 14~45mm ◇ M/C CYCLE TIME : 60SEC/PC (TENSION KEEPING INCLUDED) ◇ DIMENSION : 1300(L)×1250(W)×1650(H)mm