KYOSIN
HP-5050AAH-U
11년
주장비
분석
기계가공·시험장비 > 성형/가공장비 > 용접장비
2009-04-13
178,654,466원
고정형
시간별
원
기존의 진공프린팅 장비로 봉지한 봉지층을 버블 없이 가교할 수 있는 설비Performance (no-load)
- Pressure range : 0-0.9MPa (gauge pressure) (normal pressure: 0.5MPa) * Usage range shall not exceed the factory supplied-pressure range. -Temperature range : Room temperature - MAX200 degree C, (normal temperature: 130-160 degrees C) * Prolonged operation at 180 degrees C or more will cause faster degradation of packing. -Temperature uniformity : Less than ±10 degrees C (at the time of 130 degrees C/ 0.5MPa setting and continuous operation) (Note) -When temperature is stabilized (time of temperature rise, pressure and temperature rise, and pressure rise excluded.)-Overshoot excluded-Offset is adjusted by input shift-Control accuracy is based on PID setting of temperature controller. -Measured at 5 arbitrary points-Temperature rise time : Less than 30 minutes from room temperature to 160 degrees C *After preheating (after 1 cycle operation) Up to 110 degrees C - 130 degrees C Less than 2.5 minutes - Pressure rise time : Less than 5 minutes from atmospheric pressure to 0.5MPa(s). - Decompression time : Less than 10 minutes from 0.5MPa(s) to atmospheric pressure.- Processing capacity Less than about 30kg( 1 shelf 10kg)