1.Connections
1)Input.....HDSDI Input(SMPTE 292M),GPI Trigger
2)Analyzer Output ... HDSDI output(Moniter only),
Error Trigger(TTL Level)
3)Signal Generator output
output A,B,C .. 75-ohm BNC connector for HDSDI
4)AES Output .. BNC; may be assigned to one pair
of audio Channels
2.Standards
1)Source Formats .. 1035-I/30,1080-I/30,1080-I/25
(SMPTE 274M)
2)Frame Rates .. M and M/1.001(NTSC rate
adjustment) where M is defined by the
source format
3)Standards .. SMPTE 240M, 274M, 260M,
291M, 296M, ITU-R BT.709
3.Features
1)Embedded Audio Detection .. Up to 16 Channels
2)Picture Display .. Select F1, F2 or both,
select FF or AP
3)1H Waveform Display.. Line select, line window
maximun 10lines
4)Frame Error Statistics .. Total count of individual
error conditions, error free interval
5)Error Capture Detection .. EAV position, SAV
position,CRC fail, F-bit position, V-bit position
line number, AP data low, AP data high, XYZ
parity, ANC overrun, Audio BCH error
6)Frame Error Detection .. Same as Error Capture
7)Frame Error Logging .. Up to 100,000
errored frames
8)Error Detective .. Up to 512,000 pixels captured
9)Error Detective Triggers .. Mask any error types